Saab 93 Key Fob Replacement
Saab keys can be costly to replace. The process is simple.
You will require a phillips screwdriver that is flathead and some patience. Insert the screwdriver into the middle of the case and then slowly open it.
Having spare keys and fobs is a good idea. You will avoid being stuck and incurring towing costs.
How to replace the battery
Car key fobs that allow and lock the vehicle remotely have a battery inside that will eventually fail. In a few simple steps, owners can easily replace the battery in their key fob. To remove the battery that was in the key fob and replace it with a new one, you'll need to remove two plastic flaps that are on the opposite side. The replacement battery is an ordinary coin cell CR1632, and the process to install it is simple.
After the emergency key has been removed, you can employ a small screwdriver to cut the case of the remote fob. Do not press the case too much as the electronics are fragile and could be damaged by too much pressure.
Saab created some fantastic cars. Many of them are still in circulation today. One of the biggest issues with these cars is the ignition keys. They're not very durable, and the buttons can become sticky or lose their grip with time. If a Saab owner loses their only working key, it can be quite expensive to add an additional key at the dealer, since they'll need to replace the entire computer module and then program it with the new key to convince the car that you're not trying to take it. The good part is that you can save a lot of cash by simply replacing the case instead.
How to Remove the Manual Key
Batteries are included in all key fobs used in the process of lock and unlock vehicles. They are of a limited duration. If you're like many you'll lose yours at some point. Fortunately you can replace the battery that controls your key fob is a breeze. The only thing that is difficult is removing the old battery from the case, but it's not something that a little patience and some good work with a flathead screwdriver can't assist you with.
After you've installed the new battery, it's now time to put everything back together. To accomplish this, you'll have to open up the replacement key fob's case. This can be done by inserting a flathead screwdriver into the slot that is located in the middle of the case. Be gentle with the case until it is able to be removed.
If your old keyfob lost its connection with the car's safety system You may have to change the program of the new one. This can be done by following the manual learn procedure for adding a brand new FOB to your Saab 9-5. This method will not erase previous keys that you have learned. You can continue to use the existing FOBs if you need to re-program them. To begin this process the FOB that is to be programmed must have the mechanical key cut matching that of the vehicle.
How to Change the Case
It's a great idea to replace both the case as well as the battery whenever you're replacing the manual key or battery. These cases are prone to wearing out, especially after long-term use. It's easy to replace the case of your SAAB 9-3, and you won't need any special tools.
The first step for changing the case is to remove the manual key from the fob. This can be done by pressing the SAAB logo and then pulling out the manual key. The key fob can be sticky at times, so it might take a bit of force to take the key out.
Once you have removed the manual key from the case, you are able to begin to remove the electronic components. You'll require an flathead screwdriver to accomplish this. You'll need to take care not to damage the electronics inside, so use care when using your screwdriver. Once you've removed all electronics, it's time to take the battery out. Once you've replaced the battery, you can put everything back into a new case. You can buy cases for replacement on the internet for a pretty cheap price.
How to program the new key
Key fobs that permit you to lock or unlock your vehicle remotely, are equipped with batteries. However they have a short lifespan. It is vital to change the battery in your key fob every three to four years. This is a simple process which you can perform at home. All you need is a small screwdriver and some patience.
The first step is to remove the manual key. This can be done by pressing the blue SAAB logo on the key fob, then pulling the emergency key out. thekeylab.co.uk should easily come out with a bit of force. Once you have the key fob in place you can take out the old battery by gently pushing the screwdriver into the slot located in the middle of the case. This will split the case and make it easier to access the electronics.
Once you have the new battery and key fob case in place It is now time to program the new key. This can be done by following the steps in this video by YouTube user Cyclone Cyd. This is a fantastic video channel that offers tips on how you can carry out simple maintenance and repair tasks on vehicles.
A key fob could be an excellent way to keep an extra car key in the event you lose or break your original. You can buy a brand new key fob online or from an authorised locksmith in your area, such as United Locksmith. The price is lower than at a dealership, which will charge you for the key and programming it to the car.